OBSD4* : wiki

Epson Stylus Office BX525WD

Testé depuis OBSD 6.0 stable !

Gestion de l'impression

La partie impression fonctionne très bien …

Indiquez à Cups d'installer le fichier ppd relatif à la version BX525WD ou BX535WD. Si vous avez installer le paquet gutenprint, vous aurez le choix entre sa version et celle de foomatic.

Choisissez le protocole lpd, c'est celui qui fonctionne le mieux…
Tel que :

lpd://adr_ip/PASSTHRU

Si le package avahi est installé, elle est vu par le biais du protocole DNS-SD, voire mDNS, elle s'installe, mais après lors d'impression, cups n'arrive pas à discuter avec…


Pensez à redémarrer le service Cups !

Gestion du scanner

Après avoir installé les paquets : sane-backends xsane, il vous faudra :

  1. modifier le fichier /etc/sane.d/dll.conf pour ajouter : epkowa.
  2. il vous faudra ajouter le fichier de configuration /etc/sane.d/epkowa.conf, et modifier-le, :
    • si vous êtes connecté en usb : 'usb 0x04b8 0xProductId' -
    • ou si vous l'avez en réseau : 'net adr_ip 1865'

Une fois modifié, vous pourrez exécuter xsane.


Fichier epkowa.conf :

epkowa.conf
# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.
 
# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword.  Similarly for the other keywords.
#
usb
scsi
 
 
# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
# 
#   usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
#usb 0x04b8 0x0110
 
 
# For SCSI devices not detected, you can add an entry like:
#
#   scsi EPSON GT-20000
#
# where the GT-20000 bit corresponds to the SCSI model information as
# shown in the output of dmesg(1) or in the /var/log/kern.log file.
 
 
# Network attached devices may be made to work by first installing the
# (non-free) iscan-network-nt package and then adding configuration lines
# as per information below.
#
# For each network attached device, you must add an entry as follows:
#
#   net <IP-address|hostname> [port-number]
#
# Ask your network administrator for the device's IP address or check
# for yourself on the panel (if it has one).  The port-number is very
# optional and defaults to 1865.
# Note that network attached devices are not queried unless configured
# in this file.
#
# Examples:
#
#net 192.16.136.2 1865
#net 10.0.0.1
#net scanner.mydomain.com
 
# Some backend behaviour can be customized by using the option keyword
# followed by an option name, as shown below.
#
#   option <option-name>
#
# Currently available options:
#
# Makes the automatic document feeder the default document source
#option prefer-adf